![]() So if user wants to generate the interrupt every time the conversion is completed, the channel's configuration with enabling interrupt setting would be used for each conversion. For uVision with the ARM RDK/MDK tools, a lot of the header files are located. When in software trigger mode, the conversion would be launched by the operation of configuring channel, just like writing aconversion command. It is a very simple command line tool that. In uvision, I tries to activate this feature in edit > configurations menu. These information would be printed when the execution return to the main loop.The point is that the ADC16 interrupt configuration is set when configuring the ADC16's conversion channel. By using Atmel studio and CCStudio, I used to edit my codes by clicking on a variable or function name and see all its occurrences within the file. Also, the conversion result value is stored, and the ISR counter is increased. Finally, if you want to proceed with the build on uVision MDK-Lite version 5.37 or later, you must install the compiler appropriately in the path.If you have uVision MDK-Lite version 5.37 or later, follow the compiler download process below. (temperature correction of RSSI measurement): added an API in. In ADC ISR, the conversion completed flag would be cleared by reading the conversion result value. If your Keil 5 version is 5.37 or newer, be sure to follow the steps below. ARM: MDK-ARM version 5.25 - GCC: GCC ARM Embedded. ADC interrupt would be asserted once the conversion is completed. The J-LINK works fine with CrossWorks & IAR, and KEIL works fine with ULINK, so I dont think its faulty HW. Flash loading with J-LINK always fails with: No Algorithm found for: 00000000H - 00002C57H. Click the Keil uVision4 from desktop Menu. Basically this is a stripped down Eclipse version with Processor Expert in it. Processor Expert is available as ‘standalone’ version (called ‘Driver Suite’) from Freescale. Their IDE product is Vision (the current version is Vision4). When running the project, typing any key into debug console would trigger the conversion. I just bought a J-LINK and downloaded the eval version of Keil MDK v3.70. Temperature sensor, Buzzer, Stepper Motor by interfacing them to ARM Processor. Keil is owned by ARM and of course supports ARM devices :-). ![]() The adc16_interrupt example shows how to use interrupt with ADC16 driver.In this example, user should indicate a channel to provide a voltage signal (can be controlled by user) as the ADC16'ssample input.
0 Comments
Leave a Reply. |